Therm-a-Rest - Engineered for Your Next Backcountry Night

At 4.25 inches thick, this self-inflating pad puts serious cushion between you and the ground, with a 7.0 R-value that insulates down to extreme cold. StrataCore construction alternates ridges of air and foam for warmth without excessive weight, and the vertical sidewalls created by 3D construction maximize useable sleep surface. The TwinLock valve system uses separate valves for inflation and deflation—no more fighting with a single valve when you're breaking camp in the morning.

Weighing just 13 ounces in Regular size, this 3-inch pad sets the standard for ultralight backpacking with a 4.5 R-value that covers three-season use. Reflective ThermaCapture technology and Triangular Core Matrix construction work together to retain heat, while the baffled internal structure provides stability that keeps you centered through the night. The 30D ripstop nylon construction balances durability with minimal weight, and the WingLock valve inflates and deflates quickly.

This 2-inch self-inflating pad strikes the balance between packability and comfort, using StrataCore construction to deliver a 3.8 R-value in a 1-pound-8-ounce package. The self-inflating foam needs just a few breaths to dial in your preferred firmness, and it compresses down to 11 by 6.8 inches. The WingLock valve provides one-way inflation and moves air three times faster than standard valves, making setup and breakdown more efficient.

Die-cut urethane foam down the center of this self-inflating lumbar pillow reduces pressure on your spine while maintaining density on the sides for lateral support. At 3.6 ounces and packing down to 4 by 7 inches, it's light enough to carry anywhere—planes, cars, office chairs, stadium seats. The one-handed valve lets you adjust support on the fly without fumbling, and the self-inflating design means you're not blowing into a pillow on a crowded flight.

Stuffed with upcycled sleeping pad foam and covered in 60% recycled brushed polyester, this pillow delivers home-like comfort with a lighter environmental footprint. The cinch cord lets you tighten or loosen the fill to adjust firmness and loft—firmer for side sleeping, softer for back sleeping. At 11 ounces, it's substantial enough to provide real support but still compressible for packing.

Combining a baffled air chamber with synthetic insulation, this pillow inflates to 4 inches of cushioned support that cradles your head through the night. The precise D-shape nestles naturally into sleeping bag hoods, and at 5.6 ounces, it disappears into your pack without protest. Brushed polyester against your face adds a soft-touch comfort that pure air pillows can't match.

Sized for two, this 78-by-72-inch blanket wraps couples or solo sprawlers in water-resistant eraLoft insulation that keeps working when wet. The generous dimensions give you room to share or cocoon yourself completely, and it packs into its own storage pocket when you're done. A bottom drawcord secures the blanket around feet and reduces drafts, while the soft polyester lining feels good against skin on chilly mornings.

This single-person blanket delivers technical insulation in a form that doesn't lock you into a sleeping bag. The hollow-fiber eraLoft fill provides genuine warmth at 1 pound 6 ounces, and it packs into its own integrated pocket for convenience. A bottom-edge drawcord cinches around your feet to hold the blanket in place and seal out drafts, while the soft-touch lining feels comfortable against skin.

This quilt strips away the restrictive mummy shape while keeping 650-fill Nikwax Hydrophobic down where it matters—absorbing 90% less water and drying three times faster than untreated fill. Box baffled construction maintains loft across the surface, and full perimeter side baffles with snap closures seal out drafts when temperatures drop. At 1 pound 10 ounces for the Regular 20°F model, it's built for fastpackers and minimalists who move light but still want real warmth at camp.

This self-inflating seat cushion weighs 4 ounces and rolls up small enough for a pocket, using die-cut urethane foam to insulate you from cold ground and hard surfaces. The one-handed valve lets you adjust firmness in seconds—add air for more cushion or release some for a firmer base. A bungee closure keeps it rolled tight in your pack, and the 50D polyester construction stands up to rough use on rock, concrete, and dirt.

Closed-cell foam means this 2-ounce seat is virtually indestructible—no punctures, no air loss, no worries. The accordion-style design folds compact with a bungee closure, and the reflective ThermaCapture surface on the SOL version bounces radiant heat back toward you. Use it on wet ground, cold rock, snow, stadium bleachers, or concert lawns—anywhere you need insulation and cushioning without carrying weight.

Built for fast-and-light mountain travel, this bag uses 900-fill Nikwax Hydrophobic down to achieve a 20°F rating at just 1 pound in Regular size. The down absorbs 90% less water and maintains loft 60 times longer than untreated fill, and box baffle construction maximizes loft while minimizing cold spots. The 10D nylon ripstop shell keeps weight minimal while the ultralight fit reduces excess space and bulk.

Rated to 45°F, this synthetic bag keeps summer and shoulder-season pack weight down at 1 pound 12 ounces in Regular size. The eraLoft insulation uses hollow fibers that maintain warmth even when damp, and the 100% recycled ripstop nylon shell and liner reduce environmental impact. The Performance Fit tapers efficiently without excessive restriction, and SynergyLink connectors secure the bag to your pad.

The W.A.R.M. fit (With Additional Room for Multiple positions) gives you space to shift between back, side, and stomach sleeping while maintaining thermal efficiency that mummy bags achieve through restriction. At 2 pounds 3 ounces for the Regular 20°F model, the 650-fill Nikwax Hydrophobic down absorbs 90% less water and dries three times faster than untreated fill. Box baffled construction maximizes loft and minimizes cold spots.